Installation requirements
Water Supply
•
The washing machine fills up with a water pressure of 0.05 Mpa ~ 0.78 Mpa (0.5~8.0 kg•f/
cm
).
2
•
A water pressure level of less than 0.05 MPa (0.5 kg•f/cm
completely. Or it may take longer than normal to fill the washing machine, causing the washing
machine to turn off. (The washing machine has a fill-time limit that is designed to prevent an
overflow against a loose internal hose)
•
For the provided water hoses to reach the washing machine, make sure the water taps are
within 120 cm (4 ft) of the back of the washing machine.
•
Before using for the first time, check all connections at the water valves and taps for any leaks.
To reduce a risk of water leaks:
•
Make sure the water taps are easily accessible.
•
Turn off the water taps when the washing machine is not in use.
•
Check for any water leaks at the water inlet hose fittings.
Power supply
•
To prevent a risk of fire, electrical shock, or physical injury, all wiring and grounding must be
performed in accordance with the National Electrical Code ANSI/FNPA, No. 70 Latest Revision
and local codes and ordinances. It is the owner's responsibility to accommodate adequate
electrical power for this product.
•
Do not use an extension cord.
•
Use only the power cord that comes with your washing machine.
•
When preparing for installation, ensure that your power supply offers:
•
A fuse or circuit breaker
•
An individual branch circuit serving only your washing machine
•
The washing machine must be properly grounded. Against a malfunction or breakdown of
the machine, a proper grounding will reduce the risk of electric shock by providing minimum
resistance to the electric current.
•
The washing machine comes with a power cord that has a three-prong grounding plug for use
in a properly installed and grounded socket.
•
Do not connect the ground wire to plastic plumbing lines, gas lines, or hot water pipes.
•
Improper connection of the grounding conductor may cause electric shock. Check with a
qualified electrician or service person if the washing machine is properly grounded.
•
Do not modify the plug that comes with the washing machine. If it does not fit the socket, have
a proper socket installed by a qualified electrician.
) may inhibit the water valve to close
2
English - 8