Manual Tuning - Yamaha AV-1 Owner's Manual

LISTENING TO A RADIO PROGRAM
2
3
MEMORY AUTO/MAN'L PRESET/BAND DISPLAY
VIDEO 2
TIME ADJ TIMER
/ / REPEAT
HOUR MIN
MPONENT SYSTEM AV–1
CENTER/REAR
/DELAY
C/R/D
ON/OFF
TEST
SLEEP
POWER
4
TRACK PRESET
PRO LOGIC DSP OFF
ENHANCED MONO MOVIE
ROCK CONCERT VIDEO
DISCO HALL STADIUM
/
OPEN/CLOSE CD TUNER TAPE/MD
1
PRESET
TUNER
CD
LEVEL
PROGRAM
DSP
SUBWOOFER
1
INPUT
VOLUME
AMP

Manual tuning

1
If the built-in tuner is not selected as the input
source, press the TUNER input selector button.
2
Select the reception band [FM or AM (MW or LW)]
by pressing the PRESET/BAND button confirming it
on the display.
<
Except U.K. and Europe models
VCR
<
U.K. and Europe models
* Do not select a preset tuning mode (Do not
select the mode in which "PRESET" lights up on
the display.)
3
Press the AUTO/MAN'L button so that "AUTO"
disappears from the display.
(In this mode, stations are received in monaural.)
4
Press and hold "
or press and hold "
Release it just before reaching the desired
frequency, and then press it repeatedly until the
desired frequency appears.
Note
If you tune in to an FM station with the manual tuning
method, it is received in monaural automatically to
increase the signal quality.
E-34
>
or
>
, or
" to tune to a higher frequency,
" to tune to a lower frequency.