Model Sc3004; External Arrangement; Rear Panel; Panel Mounting - Honeywell SC Series Installation Instructions Manual

SC 2000, SC2001, SC3004

4.5 Model SC3004

4.5.1 External Arrangement

Figure 4-5: External Arrangement of Model SC3004

2X, .125"
L-1
L-2
L-3
L-4
4X, .250"
CABLE SHIELD CONNECTION SCREWS

4.5.2 Rear Panel

The pinout for the 25-pin System connector is provided later in
this chapter. The pinouts for the individual channels are located
in the chapter for that channel.

4.5.3. Panel Mounting

The panel space necessary conforms to the EIA 19" rack-mount
standard. Panel mounting ears are attached to the instrument.
L-5
0123456789ABCDEFGHIJ
L-6 0123456789ABCDEFGHIJ
0123456789ABCDEFGHIJ
L-7
0123456789ABCDEFGHIJ
L-8
VALUE CLEAR CHAN. TARE
RUN
SETUP
UP DOWN ENTER EXIT
MENU
17"
0123456789ABCDEFGHIJ 0123456789ABCDEFGHIJ
0123456789ABCDEFGHIJ 0123456789ABCDEFGHIJ
0123456789ABCDEFGHIJ 0123456789ABCDEFGHIJ
0123456789ABCDEFGHIJ 0123456789ABCDEFGHIJ
18.125"
19"
MADE IN USA
DO NOT REMOVE
FAN MOUNTING SCREWS
(QTY. 4)

4.5.4 Bench Mounting

Panel mounting ears are attached to the instrument, and may be
removed if they are not needed.
008-0608-00
Rev. G,
9.125"
8.875"
3.5"
2X, 1.75"
4X, .875"
Honeywell Sensing and Control 15