CleaningWithTheBrush; ReplacingTheSystemOuterFoilAnd TheInnerBlades - Panasonic ES‑LC50 Operating Instructions Manual

Lubrication
To maintain shaving comfort for a long time, it is
recommended that the oil provided with the shaver is
used.
1. Switch off the shaver.
. Apply one drop of oil to each of the outer
foils.
. Switch the shaver on, and run it for
approximately five seconds.
. Switch off the shaver, and wipe off any
excess oil from the outer foils with a soft
cloth.

Cleaningwiththebrush

Clean the inner blades using the short
brush by moving it in direction (A).
Clean the system outer foil, the shaver
body using the long brush.
• Do not move the short brush in
direction (B) as it will damage the
inner blades and affect their
sharpness.
• Do not use the short brush to clean
the outer foils.
ES-LC50_CH_GIFT.indb 15
Replacingthesystemouterfoiland
theinnerblades
system outer foil
inner blades
2

Replacingthesystemouterfoil
1. Press the foil frame release buttons
and lift the outer foil section upwards.
. Press the system outer foil release
buttons and pull down the system
outer foil.
. Align the side of the foil frame that has
(A)
a protrusion and the system outer foil
mark () and securely attach
together.
• The system outer foil cannot be
(B)
reversely attached.
• Always insert the system outer foil to
the foil frame when attaching to the
shaver.
. After turning the side of the foil frame
that has a protrusion to the front,
securely attach the outer foil section
to the shaver until it clicks.
once every year
once every two years
1
2 3
15
2010/09/28 15:00:15