Table of Contents
Advertisement
When the battery capacity is low
"0%" blinks when operating the shaver.
•
You can shave to times after "0%" appears.
(This will differ depending on usage.)
•
A full charge will supply enough power for approx. 1
shaves of minutes each.
Clean
Cleaningtheshaver
1. Disconnect the power cord from
the shaver.
. Apply some hand soap and some
water to the outer foil.
. Press the power switch for more
than seconds to activate the
sonic vibration cleaning mode.
•
The battery capacity lamps blink
in order.
•
After about 0 seconds, it will be
automatically turned off, or you
can turn it off by pressing the
power switch.
1
ES-LC50_CH_GIFT.indb
14
. Remove the outer foil section and
press the power switch for more
than seconds to activate the
sonic vibration cleaning mode and
clean it with running water.
5. Wipe off any drops of water with a
dry cloth.
. Dry the outer foil section and the
shaver completely.
. Attach the outer foil section to the
shaver.
. Lubricate the shaver.
3
Warning
Disconnectthepowercordfromtheshaverbefore
cleaningitinwatertopreventelectricshock.
The mark on the left means suitable for
cleaning under an open water tap.
4
6
2010/09/28
15:00:15
Advertisement
Table of Contents
