Charge
Chargingtheshaver
1
Inserttheappliancepluginto
1
theshaver.
2
Plugintheadaptorintoa
2
householdoutlet.
•
Turn the shaver off before attaching.
•
Charging is completed after approx. 1
hour.
Chargingwiththechargingstand
1. Insert the appliance plug into the
charging stand.
. Place the shaver on the charging
stand and plug in the adaptor into a
household outlet.
Cordshaving
If you insert the appliance plug to the shaver and plug
in the adaptor into a household outlet, you can use it
even if the battery capacity is low.
•
If the shaver does not work, continue charging it for
approx. 1 minute.
1
ES-LC50_CH_GIFT.indb
12
Readinglampswhencharging
2
1
The number of the battery capacity lamp will increase
All the battery capacity lamps will light up and then
•
Recommended ambient temperature for charging is 5‑
5 °C. The battery may degrade the performance or
may not charge under extreme low or high
temperatures. The charge status lamp ( ) will blink
when there is a problem with charging.
•
When charging the shaver for the first time or when it
has not been in use for more than months, the
charge status lamp ( ) may not glow. It will eventually
glow if kept connected.
While charging
The charge status lamp ( ) glows.
as charging progresses.
After charging is completed
turn off after 5 seconds.
2010/09/28
15:00:15