BYD BYD5030XYZBEV1 Manual page 117

Type II configuration (if any)

Turn the light adjusting knob at top of the left multi-function switch to turn on the
following lights:

OFF: turn off all headlights.

Position light: turn on position lights (including front position lights, rear
position lights, rear license plate light, backlight of instrument and vehicle
backlights).

Low beam: turn on the low beams and position lights.

turn on low beam and position lights. These lights will turn on or off
automatically depending on the illumination intensity sensed by the illumination
intensity sensor.
WARM TIP

The illumination intensity sensor is located at the top of dashboard. Do not cover
the sensor or splatter any liquid on it.

AUTO mode is used generally. There may be risks caused by the failure of
automatic illumination of lights under a mode other than AUTO mode.
4-4 Specifications of Other Main Functions 117
4