34
1-3 Classification of Child Restraint System
Installation of child restraint system:
1. Check the position of the special
anchorage lever and install the child
restraint system on the vehicle's seat.
WARNING
When using a lower anchor, make sure that no foreign objects are around the anchor
and the seat belt is not stuck behind the child safety seat. Make sure that the child
restraint system is fixed firmly. Otherwise, severe injury or even life threat may be
caused to a child in case of emergency stop or accident.
WARM TIP
The anchorage lever is installed in the gap between seat cushion and seat backrest.
2. Lift the headrest, and pass the child
restraint system top tether and clip
through the space between the headrest
levers to behind the backrest.
3. Open the anchor base cover. Attach the
clip to the anchor base and tighten the
top tether. Make sure that the top tether
is attached securely.
Top tether
Anchor base
Clip