Table of Contents
Advertisement
232
8-1 When Failure Occurs
Tools delivered with the vehicle
Tools are stored under the cover plate in the trunk.
.1
Towing hook
2
Wheel nut removal clamp
3
Warning triangle
4
Tyre repair device
Be sure to get familiar with the operating methods of various tools and know where they
are placed when DIY repair is needed in emergency cases.
Placing warning triangle
WARM TIP
When you park and repair your vehicle on a public road, remember to place a warning
triangle 100 ~ 200 m behind your vehicle, with its red side facing the heading direction
to warn the following vehicle drivers and prevent the occurrence of any dangerous
condition. After repair, take back the warning triangle for use in the future.
The warning triangle is used to warn the following vehicle drivers and prevent the
occurrence of any dangerous condition due to overspeed or failure of the following
vehicles in braking timely and any collision with the front vehicle that is parked or being
repaired.
Method for using the warning triangle:
1. Take all pieces of the warning triangle
out of the packing box.
2. Assembly these pieces into an enclosed
triangle.
3. Release the support of warning triangle
to its working state, as shown in the
figure.
Advertisement
Table of Contents
