Care And Cleaning - Renkforce 1582597 Operating Instructions Manual

1 0 1 8 3 2
1 0 2 1 1 2
1 0 3 3 3 2
1 0 4 8 5 5
4 5 2 5 8 0
8 2 1 #
4 2 #
*
You can now enter e.g. "83" to activate the relay – you do not need to enter the entire
code or confirm the entry with the hash key. However, the entire code must be entered
("83219") to disable the relay.

14. Care and cleaning

Never use aggressive detergents, rubbing alcohol or other chemical solutions,
as these could damage the casing or stop the product from functioning properly.
Aggressive detergents can also cause discolouration and damage the labels on the
buttons.
• This product does not need to be serviced. Use a dry, lint-free cloth to clean the product. Dust
on the keypad and in the gaps around the keys can be removed with a soft, long-haired brush.
80
Programs user code "01" to "83219"
1 9 #
Programs user code "02" to "11223"
2 3 #
Programs user code "03" to "33221"
2 1 #
Programs user code "04" to "85555"
5 5 #
Programs the superuser code for the relay to "2580"
#
Enables auto-entry mode
The relay output will be activated when the first two digits of an
access code are entered and disabled when the entire code is
entered (toggle mode).
Exits programming mode, the yellow LED will flash slowly to
indicate that the code lock is in standby mode