Renkforce 1582597 Operating Instructions Manual page 79

0 0 0 0
*
8 9 0 1 #
0 3 2 8 9 3
1 0 1 8 3 2
1 0 2 1 1 2
1 0 3 3 3 2
1 0 4 8 5 5
4 5 2 5 8 0
7 0 1 0 #
8 2 1 #
*
Example 4: Enable multi-user mode with quick entry and automatic code recognition
0 0 0 0
*
8 9 0 1 #
0 3 2 8 9 3
Enter the master code to enable programming mode (the
default master code is "0000"). The yellow LED will stay
constant.
Important - if you have programmed another master code,
enter the new code.
8901 # Enables multi-user mode
Important - If single-user mode was previously enabled, all
codes and settings (except the master code) will be deleted!
Programs the master code to "32893"
#
Programs user code "01" to "83219"
1 9 #
Programs user code "02" to "11223"
2 3 #
Programs user code "03" to "33221"
2 1 #
Programs user code "04" to "85555"
5 5 #
Programs the superuser code for the relay to "2580"
#
The code lock will be locked for 15 minutes after 10 incorrect
code entries
Enables auto-entry mode
Important - as described at the beginning, all codes must have
the same number of digits (e.g. 5 digits).
Exits programming mode, the yellow LED will flash slowly to
indicate that the code lock is in standby mode
Enter the master code to enable programming mode (the
default master code is "0000"). The yellow LED will stay
constant.
Important - if you have programmed another master code,
enter the new code.
8901 # Enables multi-user mode
Important - If single-user mode was previously enabled, all
codes and settings (except the master code) will be deleted!
Programs the master code to "32893"
#
79