Renkforce 1582597 Operating Instructions Manual page 66

7 0
0 0
#
*
70 + 1 + # = Lock the keypad for 30 seconds
3 2 8 9
*
7 0
1
#
*
70 + 5 to 10 + # = Lock the keypad for 15 minutes
3 2 8 9
*
7 0
, , , ,
5 6 7 8
9
1 0
#
*
66
Enter the memory code "70" and the keypad lock disable code ("00").
Press the # key to confirm your entry.
The keypad will be locked when an incorrect code is entered.
Press the * key to exit programming mode. The yellow LED will start to
flash again. The notification tones are now disabled. This setting is useful
in quiet office environments.
Enter the master code (in this example, the master code is "3289")
to enable programming mode, and then press the * key. The code lock
will beep twice and the yellow LED will stay constant to indicate that
programming mode is enabled.
Enter the memory code "70", and then press "1" to enable the keypad lock.
Press the # key to confirm your entry.
The keypad will be locked for 30 seconds after 10 incorrect entries.
Press the * key to exit programming mode. The yellow LED will start to
flash again. The notification tones are now disabled. This setting is useful
in quiet office environments.
Enter the master code (in this example, the master code is "3289")
to enable programming mode, and then press the * key. The code lock
will beep twice and the yellow LED will stay constant to indicate that
programming mode is enabled.
Enter the memory code "70", and then enter the number of incorrect entries
that triggers the keypad to lock (5 to 10).
Press the # key to confirm your entry.
The keypad will be locked for 15 minutes when the preset number of
incorrect entries is reached.
Press the * key to exit programming mode. The yellow LED will start to
flash again. The notification tones are now disabled. This setting is useful
in quiet office environments.