Connections; Side Panel - Yamaha P-80 Owner's Manual

Connections

SUSTAIN
DC IN 12V
1
DC IN 12V
1 DC IN 12V Jack
Make sure that the STANDBY/ON switch of the P-80 is set to
STANDBY.
Connect the AC adaptor (PA-3B or other adaptor specifically recom-
mended by Yamaha) to the DC IN 12V jack.
Plug the AC adaptor into an AC outlet.
When turning the power OFF, simply reverse the procedure.
WARNING
• Use ONLY a Yamaha PA-3B AC Power Adaptor (or other adaptor
specifically recommended by Yamaha) to power your instrument
from the AC mains. The use of other adaptors may result in irrepa-
rable damage to both the adaptor and the P-80.
• Unplug the AC Power Adaptor when not using the P-80, or during
electrical storms.
2[STANDBY/ON] Switch
Press the [STANDBY/ON] switch once to turn the power ON, a
second time to turn the power OFF. When the power is initially
turned ON, a voice selector LED will light.
CAUTION
• Even when the switch is in the "STANDBY" position, electricity is
still flowing to the instrument at the minimum level. When you are
not using the P-80 for a long time, make sure you unplug the AC
power adaptor from the wall AC outlet.
8
P-80
IN MIDI OUT HOST SELECT
MIDI
PC-2
5 6
STANDBY / ON
2
L R
TO HOST
Mac
PC-1
7
OUTPUT PHONES
3 4
L /L+R R
DC IN 12V

Side panel

PA-3B
STANDBY / ON