Huawei NE40E Hardware Description page 98

NE40E
Hardware Description
Slot Name
LPU
SRU
SFU
Interface Numbering
An interface is numbered in the format of Slot number/card number/Port number
Technical Specifications
Item
Dimensions (H x W x D)
Weight (empty)
Weight (full configuration)
Cabinet installation standard
Typical power consumption
Typical heat dissipation
DC input voltage
Issue 01 (2018-05-03)
Slot Quantity
8
2
1
Slot number: The slots of LPUs are numbered from 1 to 8. The slot number increases from left to right
facing the front panel of the NE40E (there are corresponding marks on the panel).
Card number: The cards of LPUs are numbered from top to bottom and from right to left beginning
with 0. If there is no card on a board, the card number is set to 0.
Port number: The ports of LPUs are numbered from left to right and from top to bottom beginning with
0.
Slot ID
1 to 8
9 to 10
11
Specification
 (14 U) 620 mm x 442 mm x 650 mm (24.41 in. x
17.40 in. x 25.59 in.)(Chassis main body)
 (14 U) 620 mm x 442 mm x 770 mm (24.41 in. x
17.40 in. x 30.31 in.)(Dimensions of the chassis
body together with cable trays and front and back
attachments)
25.8 kg (56.89 lb) (without filler panels)
136 kg (299.88 lb)
Can be installed in a standard 19" 800 mm-deep
cabinet. A Huawei 2.2 m-high N68E cabinet is used by
default.
3220 W (fully configured with LPUF-240s)
10447 BTU/hour (fully configured with LPUF-240s)
input voltage range: –38.4 V to –72 V

input rated voltage: –48 V/ –60 V

1 Hardware Description
Remarks
These slots hold
LPUs.
These slots hold
SRUs.
These slots hold
SFUs.
84