Chorus - Yamaha DJX Owner's Manual

3
Set the Reverb Send Level for the desired voice(s).
The Main, Dual, and Split voices can each be set to have different amounts
of Reverb. Use the corresponding Reverb Send Level parameters in the
Function mode (Main: #04, Dual: #14, Split: #24) to control this. (See
pages 27, 30, 32.)
4
Exit the Function mode.
Once you've made all desired settings, press one of the other mode but-
tons (SONG, STYLE, or VOICE).

CHORUS

CHORUS
The Chorus effect lets you enhance the sound of a voice with through the
use of pitch modulation. Two basic types are provided: Chorus and
Flanger. Chorus produces a thicker, warmer, and more animated sound,
whereas Flanger creates a swirling, metallic effect. A total of four Chorus
types are available.
1
Turn on the Chorus effect (#33) and set the Chorus
Type (#34) in the Function mode.
Selecting and changing the Function parameters:
Press the FUNCTION button, then use the numeric keypad to select the
parameter number. After "FUNCTION" stops flashing, use the numeric
keypad or +/- buttons to change the setting. (For details, see page 18.)
For a list of the Chorus Types, see page 39.
2
Set the Chorus Send Level for the desired voice(s).
The Main, Dual, and Split voices can each be set to have different amounts
of Chorus. Use the corresponding Chorus Send Level parameters in the
Function mode (Main: #05, Dual: #15, Split: #25) to control this. (See
pages 27, 30, 32.)
3
Exit the Function mode.
Once you've made all desired settings, press one of the other mode but-
tons (SONG, STYLE, or VOICE).
EFFECTS
If the Reverb Send Level is
set to a value near or at
"000," the Reverb effect
may not be heard.
The Chorus effect can
also be turned on and
off with a connected
footswitch. (See page
21.)
• The Chorus effect is
applied only to the key-
board-played voices.
• These settings are not
saved when you turn off the
power. If you wish to save
them, save them to a User
bank in the Performance
Setup feature (page 56).
• Three additional Chorus
Types are available when
controlling the DJX from a
MIDI device. (For details,
see page 114.)
If the Chorus Send Level is
set to a value near or at
"000," the Chorus effect
may not be heard.
35