Reverb Type; Chorus Type - Yamaha PORTATONE PSR-530 Service Manual

PSR-530
< Table 1-6 > MIDI Parameter Change table (DRUM SETUP)
Address
(H)
Size
(H)
Data
(H)
Parameter Name Description
Default
Value (H)
3n rr 00 1 00..7F Pitch Coarse
-64..+63 40
3n rr 01 1 00..7F Pitch Fine
-64..+63[cent] 40
3n rr 02 1 00..7F Level 0;.I27 Depend on the Note
3n rr 03 1 00..7F
Alternate Group 0:off,L.I27 Depend on the Note
3n rr 04 1 00..7F
Pan 0:random
L63..C..R63(1..64..I27)
Depend on the Note
3n rr 05 1
00..7F Reverb Send Level 0..127 Depend on the Note
3n rr 06 1 00..7F
Chorus Send Level 0..127 Depend on the Note
3n rr 07 1 00..7F Variation Send Level 0..127 7F
3n rr
08
1
00. .01 Key Assign
0:single,l:multi
00
3n rr 09 1
00. .01 Rev Note Off off/on Depend on the Note
3n rr OA 1 00..01 Rev Note On off/on 01
3n rr OB 1
00..7F Filter Cutoff Freq. -64..63 40
3n rr OC 1 00..7F Filter Resonance
-64..63 40
3n rr OD 1 00..7F EG Attack Rate -64..63 40
3n rr OE 1
00..7F EG Decay 1 Rate -64..63 40
3n
IT
OF
TOTAL SIZE 10
1 00..7F EG Decay2 Rate
-64..63 40
niDrum Setup Number (0-1)
rr:note number (ODH - 5BH)
If XG SYSTEM ON and/or GM On rnessage is received, all Drum Setup Parameter will be reset to default values.
According to the Drum Setup Reset message, individual Drum Setup Parameters can be reset to default values.
< Table 1-7 > Effect Type List
XG ESSENTIAL EFFECT
Same as LSB=0
XG OPTION EFFECT
* If the received value does not contain an effect type in the TYPE LSB, the LSB will be directed to TYPE 0.
* Panel Effects are based on the "[Number] Effect Name".
* Using an external sequencer, capable of editing and transmitting the system exclusive messages and parameter changes, allows you to select the reverb, chorus and DSP effect types
which are not accessible from the PSR-530 panel operation. When one of the effects is selected by the external sequencer, "XG Rev.," "XG Cho." or "XG Eff." will be shown on the
display.
REVERB TYPE
CHORUS TYPE