Connecting To A Personal Computer; Midi Terminals - Yamaha DJX Owner's Manual

MIDI FUNCTIONS

CONNECTING TO A PERSONAL COMPUTER

CONNECTING TO A PERSONAL COMPUTER
By connecting your DJX's MIDI terminals to a personal computer, you can
have access to a wide variety of music software.
When using a MIDI interface device installed in the personal computer,
connect the MIDI terminals of the personal computer and the DJX.
Use only special MIDI cables when connecting MIDI devices.
Connect the MIDI terminals of the DJX to the MIDI terminals
of the personal computer.
Computer
(sequencer software)
When using a MIDI interface with a Macintosh series com-
puter, connect the RS-422 terminal of the computer (modem or
printer terminal) to the MIDI interface, as shown in the diagram
below.
Computer
(sequencer software)

MIDI Terminals

In order to exchange MIDI data between multiple devices,
each device must be connected by a cable.
The MIDI terminals of the DJX are located on the rear
panel.
MIDI IN ........... Receives MIDI data from another MIDI device.
MIDI OUT ....... Transmits the DJX's keyboard information as MIDI
94
MIDI OUT
MIDI IN
MIDI
interface
RS-422
data to another MIDI device.
MIDI IN
DJX
MIDI OUT
MIDI IN
DJX
MIDI OUT
IN MIDI OUT
When using a Macintosh
series computer, set the
MIDI interface clock setting
in the application software
to match the setting of the
MIDI interface you are
using. For details, carefully
read the owner's manual for
the software you are using.
• Special MIDI cables (sold sepa-
rately) must be used for connecting
to MIDI devices. They can be
bought at music stores, etc.
• Never use MIDI cables longer than
about 15 meters. Cables longer
than this can pick up noise which
can cause data errors.