Function Parameters - Dual Voice - Yamaha DJX Owner's Manual

PLAYING VOICES — THE VOICE MODE
2
Select the desired Dual voice and make other set-
tings for the voice (if desired) in the Function mode.
Selecting and changing the Function parameters:
Press the FUNCTION button, then use the numeric keypad to select the
parameter number. After "FUNCTION" stops flashing, use the numeric
keypad or +/- buttons to change the setting. (For details, see page 18.)
3
Exit the Function mode.
Once you've made all desired settings, press one of the other mode but-
tons (SONG, STYLE, or VOICE).
Function Parameters — Dual Voice
The Function parameters provide all settings for the Dual voice. Like the similar settings in the Main
Voice mode, these settings let you change or enhance the sound of the Dual voice separate from the
Main voice. These settings include:
• Volume
• Octave
• Pan
Function Parameters
No. Parameter Name
F11 Dual Voice Volume
F12 Dual Voice Octave
F13 Dual Voice Pan
F14 Dual Voice Reverb
Send Level
F15 Dual Voice Chorus
Send Level
F16 Dual Voice DSP
Effect Send Level
F17 Dual Voice
F18 Dual On/Off
30
• Reverb Send Level
• Chorus Send Level
• DSP Effect Send Level
Display Name Range/Settings
D.Volume 0 — 127
D.Octave -2 — 2 (octaves)
D.Pan -7 (full left) —
0 (center) —
7 (full right)
D.RevLvl 0 — 127
D.ChoLvl 0 — 127
D.DspLvl 0 — 127
D.Voice 0 — 284
Dual on, off
• Dual Voice
• Dual On/Off
Description
This determines the volume of the Dual voice, letting
you create an optimum mix with the Main voice.
This determines the octave range for the Dual voice.
Use this to create an octave layer with the Main voice.
This determines the pan position of the Dual voice in
the stereo image. For a spacious sounding effect, set
this value at or near -7, and set the Main Voice Pan
(page 27) at the opposite positive value.
This determines how much of the Dual voice's signal is
sent to the Reverb effect. (See page 34.) Higher values
result in a louder Reverb effect for the Dual voice.
This determines how much of the Dual voice's signal is
sent to the Chorus effect. (See page 35.) Higher values
result in a louder Chorus effect for the Dual voice.
This determines how much of the Dual voice's signal is
sent to the DSP effect. (See page 36.) Higher values
result in a louder DSP effect for the Dual voice.
This determines the Dual voice. (See list on page 104.)
This turns the Dual Voice mode on/off. (This is the
same function as that of the DUAL button. It can also
be controlled by a connected footswitch; see page 21.)
• For the Dual voice to be
heard properly, make sure
to:
* Select a different voice
(#17, Dual Voice).
* Set the volume to an
appropriate level (#11, Dual
Volume).
These settings are not saved
when you turn off the
power. If you wish to save
them, save them to a User
bank in the Performance
Setup feature (page 56).