Function Parameters - Dual Voice; F11 D.volume Dual Voice Volume; F12 D.octave Dual Voice Octave; F13 D.pan Dual Voice Pan - Yamaha PSR-270 Owner's Manual

4
Change the parameter setting or value.
After the "FUNCTION" indication stops flashing, use the numeric keypad to
change the value or setting. For on/off settings, use the +/- buttons.
Restoring the Default Value
If you've changed the parameter
setting, you can instantly restore
the default setting by pressing both
+/- buttons simultaneously.
5
Set other parameters as needed.
To select and set other parameters, repeat steps 2 - 4 above.
6
Exit the Function mode.
Once you've made all desired settings, press one of the other mode but-
tons (SONG, STYLE, or VOICE).
Function Parameters — Dual Voice
The Function parameters provide all settings for the Dual voice. Like the similar settings in the Main
Voice mode, these settings let you change or enhance the sound of the Dual voice separate from the
Main voice. These settings include:
• Volume
• Octave
• Pan
Function Parameters
No. Parameter Name
F11 Dual Voice Volume
F12 Dual Voice Octave
F13 Dual Voice Pan
F14 Dual Voice Reverb
Send Level
F15 Dual Voice Chorus
Send Level
F16 Dual Voice DSP
Effect Send Level
F17 Dual Voice
F18 Dual On/Off
Strings
050
STYLE
FUNCTION
Negative values
To directly enter negative values (for those
parameters that have negative values),
simultaneously hold down the - button and
press the desired number button.
• Reverb Send Level
• Chorus Send Level
• DSP Effect Send Level
Display Name Range/Settings
D.Volume 0 — 127
D.Octave -2 — 2 (octaves)
D.Pan -7 (full left) —
0 (center) —
7 (full right)
D.RevLvl 0 — 127
D.ChoLvl 0 — 127
D.DspLvl 0 — 127
D.Voice 1 — 238
Dual on, off
PLAYING VOICES — THE VOICE MODE

• Dual Voice

• Dual On/Off

Description
This determines the volume of the Dual voice, letting
you create an optimum mix with the Main voice.
This determines the octave range for the Dual voice.
Use this to create an octave layer with the Main voice.
This determines the pan position of the Dual voice in
the stereo image. For a spacious sounding effect, set
this value at or near -7, and set the Main Voice Pan
(page 31) at the opposite positive value.
This determines how much of the Dual voice's signal is
sent to the Reverb effect. (See page 40.) Higher values
result in a louder Reverb effect for the Dual voice.
This determines how much of the Dual voice's signal is
sent to the Chorus effect. (See page 41.) Higher values
result in a louder Chorus effect for the Dual voice.
This determines how much of the Dual voice's signal is
sent to the DSP effect. (See page 42.) Higher values
result in a louder DSP effect for the Dual voice.
This determines the Dual voice. (See list on page 109.)
This turns the Dual Voice mode on/off. (This is the
same function as that of the DUAL button. It can also
be controlled by a connected footswitch; see page 91.)
These settings are not saved
when you turn off the
power. If you wish to save
them, save them to a User
bank in the One Touch
Setting feature (page 72).
35