Formatting Usb Flash Memory - Yamaha Portable Grand DGX-630 Owner's Manual

Saving and Loading Data

Formatting USB Flash Memory

New USB flash memory must be formatted before they can be used by this instrument.
CAUTION
• If you format a USB flash memory that already contains data, all of
the data will be erased. Be careful not to erase important data
when using the format function.
1
After connecting the USB flash memory
to be formatted to the instrument's USB
TO DEVICE terminal, check that the
icon is showing in the MAIN display.
2
Press the FILE CONTROL [MENU] but-
ton.
3
Use the CATEGORY [ ] and [ ] but-
tons to select the Format item.
The display prompts you for confirmation.
4
Press the [EXECUTE] button and the
display prompts you for confirmation.
You can press the [-] button at this point to can-
cel the operation.
98
DGX-630/YPG-635 Owner's Manual
5
Press the [EXECUTE] button again, or
the [+] button, and the format operation
will begin.
CAUTION
• Once the format-in-progress message appears on the display
the format operation cannot be canceled. Never turn off the
power or remove the USB flash memory during this operation.
6
A message will appear on the display to
inform you that the operation has fin-
ished.
Press the [EXIT] button to return to the MAIN
display.
NOTE
• If the USB flash memory has been write-protected, an appropriate
message will appear on the display and you will not be able to exe-
cute the operation.