Setting The Number Of Beats Per Measure, And The Length Of Each Beat - Yamaha Portable Grand DGX-630 Owner's Manual

Setting the Number of Beats per Measure, and the Length of Each Beat

In this example we'll set up a 5/8 time signature.
1
Press and hold the [METRONOME ON/OFF] button for
longer than a second to select the function "Time Signa-
ture–Numerator".
Hold for longer
than a second
2
Use the dial to select the number of beats per measure.
The available range is from 1 through 60. Select 5 for this example.
A bell accent will be sounded at the first beat of each measure.
3
Press the CATEGORY [ ] and [ ] buttons as many times
as necessary to select the beat length function "Time Sig-
nature–Denominator".
4
Use the dial to select the beat length.
Select the required length for each beat: 2, 4, 8, or 16 (half note, quarter
note, eighth note, or 16
Numerator
(Number of
beats per
measure.)
th
note). Select 8 for this example.
The Metronome
Denominator
(The length of
one beat.)
NOTE
• The metronome time signature
will synchronize to a style or
song that is playing, so these
parameters cannot be changed
while a style or song is playing.
DGX-630/YPG-635 Owner's Manual
25