Westfalia 81 19 62 Instruction Manual page 14

Using
1. To jam the workpieces to be cut
(wooden beam,
planks etc.) in the sawhorse, lift
up the workpieces holder (D).
2. Rest the workpiece on the V-seat
(E) and slide the workpiece in
direction to the baffle pad (F). As
soon as the workpiece touches
the baffle pad (F) and tilt down,
the workpiece holder (D) moves
down and jams the workpiece
securely in place.
3. Saw the workpiece piece by piece
from the long side according to
the desired length. Do not cut the
workpiece too short. Cut the
workpiece max. up to the yellow marked label.
4. For releasing the jammed workpiece, lift up the workpiece holder.
Cleaning and Storing
 Clean the sawhorse with a cloth or a hand broom.
 Protect the sawhorse from stubborn dirt and
moisture. Oil all moving parts from time to time.
 Fold down the sawhorse and store it in a dry place
out of reach of children and persons in need of
supervision. For folding down the sawhorse, lift up
the quick locks and release the rod struts (see
chapter Installation on page 3 – 4).
Oeration
log, wooden
14
!