Time-Setting Options - NEFF B6AVH7A.1 User Manual And Installation Instructions

Hide thumbs Also See for B6AVH7A.1:
Table of Contents

Advertisement

en Time-setting options
8.4 After every steam operation
The remaining water is pumped back into the water
tank after every operation with steam. Then empty and
dry the water tank and the cooking compartment.
Emptying the water tank
WARNING ‒ Risk of burns!
The water tank may heat up while the appliance is in
operation.
Wait until the water tank has cooled down from the
previous operation.
Remove the water tank from the tank recess.
ATTENTION!
Drying the water tank in the hot cooking compartment
leads to damage to the water tank.
Do not dry the water tank in the hot cooking com-
partment.
Cleaning the water tank in the dishwasher will damage
it.
Do not clean the water tank in the dishwasher.
Clean the water tank with a soft cloth and standard
washing-up liquid.
Press on the water tank.
1.
Pull out the water tank.
2.
Unscrew the lid on the water tank.
3.
Empty the water tank, clean it with detergent and
4.
then rinse it thoroughly with clean water.
9 

Time-setting options

Your appliance has different time-setting options, with
which you can control its operation.
9.1 Overview of the time-setting options
With the
button, select the different time-setting op-
tions.
Time-setting
Use
option
Timer
The timer can be set independently
of the appliance when it is in opera-
tion. It does not affect the appliance.
Cooking time
If you set a cooking time, operation
of the appliance stops automatically
once this time has elapsed.
End time
For the cooking time, you can set the
time at which operation ends. The
appliance starts up automatically so
that it finishes cooking at the re-
quired time.
Time
You can set the time.
9.2 Setting the timer
The timer runs independently of the appliance when it
is in operation. The timer can be set when the appli-
ance is switched on or off, up to 23 hours and 59
14
Dry all parts with a soft cloth.
5.
Rub the seal on the lid until dry.
6.
Leave the water tank to dry with the lid open.
7.
Place the lid on the water tank and screw it on.
8.
Insert the water tank.
9.
Drying the cooking compartment
WARNING ‒ Risk of burns!
The appliance will become hot during operation.
Allow the appliance to cool down before cleaning it.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance, this will damage the
enamel.
Do not use the appliance if there is water on the
cooking compartment floor.
Wipe away any water on the cooking compartment
floor before operation.
Requirement: The cooking compartment has cooled
down.
Remove any dirt from the cooking compartment.
1.
Dry the cooking compartment with a sponge.
2.
Remove limescale marks with a cloth soaked in vin-
3.
egar, then rinse with clean water and dry with a soft
cloth.
Leave the appliance door open for 1 hour so that
4.
the cooking compartment dries completely.
minutes. The timer has its own audible signal so that
you can tell whether it is the timer or a cooking time
which has elapsed.
Press the
button repeatedly until
1.
in the display.
Use the or  button to set the timer duration.
2.
Button
Default value
5 minutes
10 minutes
The timer duration can be set in 30-second incre-
ments up to 10 minutes. Above 10 minutes, the
time increments become longer the higher the
value.
a The timer starts and the timer duration begins to
count down after a few seconds.
a An audible signal sounds and the timer duration is
zero in the display when the timer duration has
elapsed.
Once the timer duration has elapsed:
3.
Press any button to switch off the timer.
Changing the timer
You can change the timer duration at any time.
Requirement:  is highlighted on the display.
Use the or button to change the timer duration.
a The appliance applies the change after a few
seconds.
is highlighted

Advertisement

Table of Contents
loading

Table of Contents