Specifications - Sharp PN-86HC1 Operation Manual

nProduct Specifications
Model
LCD component
Max. resolution
Max. colors
Pixel pitch
Brightness (typical)
Contrast ratio (typical)
Viewing angle
Screen active area
Computer input signal
Sync signal
Plug and play
Input Video
terminals
Audio
Serial (RS-232C)
Output Audio
terminals
System CPU
Memory
Storage
LAN terminal
Wireless LAN
USB
Expansion slot
Speaker output
Touch Detection method
Panel
Computer connector
Power requirement
Operating temperature *
Operating humidity *
Power consumption *
(standby mode * )
5
Dimensions
(excluding protrusions)
Weight
*1 Brightness will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the nature of the
equipment, it is not possible to precisely maintain a constant level of brightness. This is the brightness of the LCD panel, not the
brightness of the product.
*2 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such
cases, please check the temperature condition specified by the optional equipments.
*3 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satisfied.
*4 When an option is installed in the expansion slot. When an option is not installed, PN-86HC1: 420 W, PN-75HC1: 360 W.
*5 When Power Save Mode is set to On.
When Power Save Mode is set to Off, and no optional part is attached: 2.0 W
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
44
E

Specifications

PN-86HC1
86" Class
[85-9/16 inch (217.4 cm) diagonal] TFT LCD
(pixels) 3840 x 2160
Approx. 1.07 billion colors
0.4935 mm (H) × 0.4935 mm (V)
2 1
400 cd/m *
1200: 1
178° right/left/up/down (contrast ratio ≥ 10)
inch (mm) 74-5/8 (W) x 41-15/16 (H)
(1895.0 x 1066.0)
Analog RGB (0.7 Vp-p) [75 Ω]
Horizontal/vertical separate (TTL: positive/negative)
VESA DDC2B
Mini D-sub 15 pin, 3 rows x 1
HDMI x 3
Mini AV in x 1
Mini YPbPr x 1 (Component)
3.5 mm mini stereo jack x 1
D-sub 9 pin x 1
3.5 mm mini stereo jack x 1
Digital audio output (optical) x 1
Arm Cortex - A53 processor (quad core)
1GB
8GB
10BASE-T/100 BASE-TX (Wake on LAN only)
IEEE802.11ac/n/a/g/b compliant (When a wireless adapter is connected)
2.0 compliant (Type A) x 3
19 V, 4.74 A
(power supplied when expanding the functions with an optional part)
10 W + 10 W
Infrared blocking detection method
USB (2.0 compliant) (Type B) x 2
AC 100 - 240 V, 5.9 A, 50/60 Hz
* 41°F to 95°F (5°C to 35°C)
2 3
20% to 80% (no condensation)
3
4
530 W (0.5 W)
inch (mm) Approx. 78-1/4 (W) x 4-7/16 (D) x 46-1/4 (H)
(1988 x 113 x 1175)
lbs. (kg) Approx. 176.4 (80)
PN-75HC1
75" Class
[74-1/2 inch (189.3 cm) diagonal] TFT LCD
0.4296 mm (H) × 0.4296 mm (V)
64-15/16 (W) x 36-9/16 (H)
(1649.7 x 927.9)
AC 100 - 240 V, 5.2 A, 50/60 Hz
460 W (0.5 W)
Approx. 68-5/16 (W) x 4-1/8 (D) x
40-13/16 (H) (1735 x 105 x 1036)
Approx. 134.5 (61)