Rs-232C Command Table - Sharp PN-86HC1 Operation Manual

Controlling the Monitor with a computer (RS-232C)

RS-232C command table

How to read the command table
Command: Command field (See page 38.)
Direction: W When the "Parameter" is set in the parameter field (see page 38), the command functions as described
R The returned value indicated under "Reply" can be obtained by setting "????" or "
Parameter: Parameter field (See page 38.)
Reply: Response (Returned value)
TIPS
• In the standby mode, the only command that is used is Power control.
Power control/Input mode selection
Function
Power control
Input mode selection
* You can use "Wake On LAN (Magic Packet)" to turn on the power via LAN.
It is not possible to turn on the monitor with the IP Control command.
Picture menu
Function
BRIGHT
SIZE (Screen size selection)
Sound menu
Function
VOLUME
MUTE AUDIO
40
E
under "Control/Response Contents".
parameter field. (See page 38.)
Command Direction
POWR W
R
INPS W
R
Command Direction
VLMP WR
WIDE W
WR
Command Direction
VOLM WR
MUTE WR
Parameter Reply
0 Switches to standby mode.
1 Returns from standby mode.*
0 Standby mode
1 Normal mode
0 Toggle change for input mode.
2 VGA
3 YPBPR
4 AV
10 HDMI 1
13 HDMI 2
18 HDMI 3
21 OPS
"ERR" when nothing is attached in the expansion slot.
24 APPLICATION
2 VGA
3 YPBPR
4 AV
10 HDMI 1
13 HDMI 2
18 HDMI 3
21 OPS
24 APPLICATION
Parameter Reply
0-100 0-100
0 0 Toggle change for screen size.
1-5 1-5 1: 16:9, 2: Dot by Dot, 3: 4:3, 4: Zoom1, 5: Zoom2
Parameter Reply
0-100 0-100
0-1 0-1 0: OFF, 1: ON
?" in the
Control/Response contents
Control/Response contents
Control/Response contents