System Menu - Sharp PN-86HC1 Operation Manual

System menu

Touch or on the side of the screen, and touch
on the monitor or the remote control to display the menu.
nNetwork
Ethernet
Set whether or not to use LAN terminal. Set the IP address, subnet mask, and other settings.
Get IP address automatically
If your LAN has a DHCP server and you wish to obtain an address automatically, select this setting.
Static IP address
To set the address manually, select this setting and set IP, Gateway, Subnet, DNS 1, and DNS 2.
Wireless LAN
Set whether or not wireless LAN will be used. If used, the monitor will connect to the access point.
Network status
Display network connection information.
nScreen lock
Lock screen mode
You can specify the background for Lock screen (page 31).
Lock screen password
Set the password for Lock screen (page 31). When a password is set, the screen will also lock when the power is turned on.
nAdvanced
Wallpaper
Set the wallpaper.
Date and time
When connected to the Internet, you can have the time set automatically. When Off, set the date and time manually.
You can also set the time zone.
Language
Set the display language.
E-board Mode
Select single touch or multi-touch for the touch mode.
Backlight Off
When set to On, the backlight turns off. Audio does not turn off. When you touch the screen, the backlight turns back on.
nUpdate
Not normally used.
Use to update the main software.
nRecovery
Reset settings
Reset some of the settings.
All Reset
Return the settings to the factory default settings.
nAbout
Display system information.
TIPS
• You can configure the system keyboard settings using the buttons on the system keyboard.
- . In the APPLICATION mode, you can also press the MENU button
Menu Items
35
E