Remote Control In/Out Terminals [U.s.a. And Canada Models] - Yamaha DVD-C996 Owner's Manual

[U. K. model]
S VIDEO VIDEO
1
SUB
1 L WOOFER
2
R COAXIAL
PCM/
AUDIO
VIDEO OUT OUT
20 18 16 14 12 10 8 6 4 2
21 19 17 15 13 11 9 7 5 3 1
Remote Control in/out Terminals
[U.S.A. model]
OUT IN
REMOTE
CONTROL
COMPONENT S VIDEO VIDEO
VIDEO OUT
1
SUB
P 1 L WOOFER
R
Y P 2
B R COAXIAL
PCM/
AUDIO
VIDEO OUT OUT
AV
OPTICAL
DIGITAL
DTS
[U.S.A. and Canada models]
OPTICAL
DIGITAL
DTS
21-pin SCART terminal
U.K. and Europe models
If your video monitor has only 21-pin terminal for video
input, and you want to connect it directly to this unit, you
can use this unit's 21-pin SCART output terminal (this
terminal does not output RGB component signals).
Pin no. Video
1 Audio output (R)
3 Audio output (L)
4 Audio GND
8 Switching voltage
13 No connection
14 Blanking GND
15 No connection
16 Blanking
17 Video output GND
18 Video input GND
19 Video output
21 GND
(Pin no.2, 5 to7, 9 to 12, 20: no connection)
• You can select 'Video' or 'S-Video' at the '6 AV Output'
on the setup menu '9.Other settings'. See p.30.
These terminals are used for custom installation system that
transmits remote control signals via cables. Connect this
unit's REMOTE CONTROL IN to the Remote control
output of the control unit of your system.
By connecting this unit's REMOTE CONTROL OUT to
another piece of equipment's Remote control input terminal,
you can also operate that equipment with the system remote
control.
CONNECTIONS
S video
Audio output (R)
Audio output (L)
Audio GND
Switching voltage
S video (C) output GND
Blanking GND
S video (C) output
Blanking
S video (Y) output GND
Video input GND
S video (Y) output
GND
11