Table of Contents
Advertisement
Getting
Started
Setting
the TV
IMPORTANT!
Make sure you have completed
all the
necessary
connections.
(See "Connecting
a
TV"
on page 13)
_]_ Press DVDICD.
•_ "]_'_,'E2"
appears on the display panel.
OTurn
on theTV and set to the correct video-in
channel. You should see the background
screen on
the TV,
"_ Usually this channel is between
the lowest and
highest channels and may be called FRONT, AN IN
orVIDEO,
See yourTV
manual for more details,
•_ Or, you may go to channel I on yourTV, then
press the Channel down button
repeatedly until
you see theVideo
In channel,
•_ Oh theTV
remote control
may have a button
or
switch that chooses different
video modes,
In order for a DVD to play on this DVD receiver;
the color system of the DVD, the TV and the DVD
receiver should match. Before changing the TV
system, determine
the color system of your TV.
_]_ In DVD/CD
mode, press SET
UP.
Press I_ repeatedly to select [VIDEO
SETUP
PAGE].
_]t Press Av
to highlight [TVTYPE],
then press I_.
MULTI
- Select this if the connected TV is
compatible
with both NTSC and PAL (multi-
system). The output
format will be in accordance
with the video signal of the disc,
O
Select a setting and press
ENTER
(OK).
--) Follow the instructions
shown
on theTV
to
confirm
the selection
(if any).
-) If a blank/distorted
TV screen
appears,
wait for
15 seconds
for auto recovery
to activate.
Set the aspect
ratio of the DVD receiver
according
to theTV
you have connected.The
format
you
select must be available
on the disc. If it is not, the
TV display setting
will not affect the picture
during
playback.
_[_ In DVD/CD
mode, press SET UP.
Press I_ repeatedly to select [VIDEO
SETUP
PAGE].
Press AV
to highlight [TV DISPLAY], then press I_.
Press AV
to highlight
one of the options
below:
PAL - Select this if the connected
TV has the PAL
color
system.
It will change the video signal of an
NTSC disc and output
it to PAL format.
NTSC
- Select this if the connected
TV has the
NTSC color
system.
It will change the video signal
of a PAL disc and output
it to NTSC format.
Press AV
to highlight one of the options
below:
4:3 PAN
SCAN
- Select this if you have a
conventional
TV and want
both sides of the picture
to be trimmed
or formatted
to fit your TV screen.
4:3 LETTER
BOX
- Select this if you have a
conventional
TV, In this case. a wide picture with
black bands on the upper and lower portions
of
theTV
screen will be displayed,
16:9 - Select this if you have a wide-screen
TV.
_[_ Select a setting and press ENTER
(OK).
TIPS:
To return
to the previous
menu, press _1.
To clear
the menu, press
SET UP.
19
Hide quick links:
Advertisement
Table of Contents
