Yamaha CINEMASTATION DVR-C300 Owner's Manual page 16

Connections
A
U Connect the speaker cable with the white line to
the + connector on the front/center/surround
speaker and with the black band to the
- connectol:
Lever
-- +
!lack__ _ Wllite
ice
Dane
Press the lever down.
Lhen insert the cable
into the hole and
release the leve_
A
q[_ Connect the speaker cable with the white line to
the + connector of each terminal on the
subwoofer and with the black band to the
- connectol:
Lever
O Connect the subwoofer to the DVD receiver using
the system control cable from the subwoofer to
the TO NX-SW300 terminal at the rear of the
DVD receiver.
Notes:
- Ensure that the speaker cables are correctly
connected, Improper connections may damage the
system due to a short-circuit.
- When connecting the speakers, _x the speaker
cables in place so that cables do nat leasen. If your
foot or hand accidentally gets caught on a lease
speaker cable, the speaker may fall.
- To prevent unwanted noise, do not place the
subwoofer too close to the DVD receiver, AC power
adaptor, TV or other sources of radiation.
Lift up the lever, then
insert the cab[e into
the hole and replace
the lever.
12