Basic Operations - Yamaha VCD-100K Owner's Manual

This manual mainly describes how to operate this unit by using the remote control transmitter. To operate this unit from
the front panel, use the same named buttons on the front panel.
Loading discs and starting disc play
NATURAL SOUND VIDEO CD CHANGER VCD I00K
1 POWER
1
Turn the power on.
2
Open the disc tray and load discs.
OPEN/ CLOSE
3
Close the disc tray.
Exchanging discs while playing another disc
During play, you can open the disc tray by pressing the
PLAYXCHANGE button without interrupting disc play. In this
case, pressing the DISC SKIP button has no effect.

BASIC OPERATIONS

5–Disc Carouse
Digital Echo / 1 1 Step Key C
MPX KARAOKE
ENTER
POWER
Label side
upward.
Disc tray
OPEN/CLOSE
2, 3
1 2
STOP/
RETURN
4
Start a disc play.
Play will begin from the first track of Disc 1 automatically.
* If you want to play a desired track on another disc, see
the next page.
This unit stops at the begining of the first track on the disc.
Note
If the STOP/RETURN button is not pressed (except when
"KARAOKE" is illuminated on the display), play will not stop
until the last track on the last-numbered disc has been played.
Note
Additionally, you can close the disc tray by the following ways.
If the tray is closed by these ways, play will begin
automatically.
Press the PLAY/SELECT button. (Play will begin from the
first track of Disc 1.)
Press a numeric button, and then press the PLAY/SELECT
button or the ENTER button.
Press the front edge of the disc tray gently. (Play will begin
from the first track of Disc 1.)
PROG
OPEN/ CLOSE
KARAOKE MPX CANCEL
1 2 3 ENTER
4 5 6
7 8 9 0
INDEX DISC SKIP
PREV NEXT
SKIP SEARCH
KEY
CONTROL
STOP PLAY/REPEAT
RETURN SELECT
PLAY/REPEAT
SELECT
To stop play
STOP
RETURN
4
9