Using Sound Field Processor - Yamaha EMX-100RDS Owner's Manual

USING SOUND FIELD PROCESSOR

1
1
6
6
A
TIME PROG
MODE REPEAT
DISC SKIP
CENTER/REAR
TEST
/DELAY
1
LEVEL
SLEEP
2
CD
2 3 4 5
2 3 4 5
7 8 PRESET
7 8 9 0
B C D E
+
I0
RANDOM OPEN/CLOSE TUNER
STOP PLAY/PAUSE
INPUT
FLAT
MUSIC PROGRAM USER
STANDBY/ON
DISPLAY
VOLUME
Adjusting DELAY TIME
You can adjust the time difference between the beginning of
the sound from the main speakers and the beginning of the
effect sound from the rear speakers.
The larger the value, the later the effect sound is generated.
This adjustment can be made to all programs (except DOLBY
3 STEREO) individually.
Control range
PRO LOGIC : 15, 20, 25, 30 milliseconds
HALL, ARENA
1
Press the CENTER/REAR/DELAY selector button once
or more so that "DEL" appears on the display.
2
By continuously pressing the LEVEL control + or – button,
the value changes continuously.
The value stops changing momentarily at the preset point.
Notes
When DOLBY 3 STEREO is selected, this adjustment
cannot be made.
Adding too much delay will cause an unnatural effect with
some sources.
When the LEVEL control button is pressed, sound is
momentarily interrupted.
Note
The values of the delay time, center level and rear level you
set the last time will remain memorized even when this unit is
in the standby mode.
However, if the power cord is kept disconnected for more
than one week, these values will be automatically changed
back to the original factory settings.
E-36
: 15, 20, 25, 30, 40, 50 milliseconds
Adjustable