Program Play - Yamaha 480 Owner's Manual

You can enjoy listening to your favorite tracks in any desired order using programmed play. As many as 25 tracks can be
programmed.
1
Stop the unit.
2
PROG
Display information during program play
PROGRAM
TOTAL
PROGRAM
TOTAL
1 2 3 4 5 6
Shows the program number for the track to be set next.
Shows the selected track number.
Shows the total time of the tracks currently programmed.
Shows only the numbers of programmed tracks.
* If the total time becomes 100 minutes or more, the highest
position of the figure will not be displayed.

PROGRAM PLAY

OPEN/CLOSE
2 PROG TAPE
SPACE
1
4
7
SKIP
SEARCH
SYNCHRO
STOP
PROGRAM
TOTAL
DIMMER TIME
CLEAR PEAK
S/F RANDOM
REPEAT
+
2 3
10
3
5 6
4
8 9 0
PAUSE PLAY
1
INDEX
STOP
+
–
OUTPUT LEVEL
3
Select the desired track.
* Repeat this operation to program more tracks. You can
select the same track again.
4
Notes
•
In step 2, if "P-01" does not appear in the display, press the
TIME display mode-select button.
•
If, during programming, the TIME display mode-select button
is pressed, the program number display can be changed to
display the total time of the programmed tracks. To return to
the previous display, press the TIME display mode-select
button once again.
•
The SKIP ( and
playing, but only within the range of the programmed tracks.
•
The SEARCH (
playing to search through all tracks, including
unprogrammed tracks.
•
The PAUSE mode can also be programmed (one time only),
if so desired, by pressing the TAPE button instead of a
numeric button. (In this case, "
display.)
•
If, for a compact disc with 25 tracks or more, track number
25 or higher is programmed, the total time will disappear
from the display.
5
PLAY
) button can be used during
and ) button can be used during
B" is illuminated in the
13