Cable Layout - Bauer Jupiter 250 Mounting Instructions

19. Cable layout

The operator is already equipped with a supply cable (12 V) measuring 100 cm. The
connections of the end switches are wired in the crankcase and don' t have to be in-
stalled outsides.
By a length of 4 meters, the diameter of the wire connecting the motor and the con-
trol board must be equal to 2x1,5 mm
of the connecting wire must be equal to 2x2,5mm
Zuleitung
230V (3x1,5)
Legend
Blinkleuchte:
Steuerungskasten:
Zuleitung:
Notentriegelung:
Jupiter 250:
Lichtschranke und Motorleitung:
Magnetverriegelung:
2
.By a length exceeding 4 meters, the diameter
2
.
Lichtschranke
(4x0,8)
warning light
control box
supply line
emergency release
operator Jupiter 250
light barrier and engine supply line
magnetic latching
22
Motorleitung
By a length less or equal to 4m:
2
12 V (2x1,5mm )
By a length exceeding 4m:
12V (2x2,5)