Mode Of Operation; Scope Of Delivery - Bauer Jupiter 250 Mounting Instructions

13. Mode of operation

The device is operated electromechanically. A 12 V DC motor drives a shaft. A driving
rod attached to the screw nut pushes the shaft out of or into the drive unit thus moving the
gate. As soon as the operator reaches the end positions which have been set before it
automatically stops by means of the end switches.
When the wings of the gate exceed 2 m or a gate is provided with two wings it is recom-
mendable to mount a stopper in the position " GATE CLOSED" . To have an additional
locking device, you can install an electronic lock.
The operator is self-locking. When the gate is locked (normal operation), it is not possible
to open it manually without doing damage to the operator or the sheathing. If the self-
locking capacity of the gate is insufficient, you have to install an electronic lock in addi-
tion.

14. Scope of delivery

(1) 1 x mounting instructions
(2) 1 x operator Jupiter 250
(3) 1 x sheathing for gate wing
(4) 1 x sheathing for pile
(5) 1 x hexagon bolt M10x40
(6) 1 x hexagon bolt M10x45
Mounting instructions - mechanics
(7) 2 x cotter-pin 3,2 x 20
(8) 1 screwdriver small
(9) 1 button cell 3 V
(10) 1 x clamp
(11) 1 x silicone aerosol
15