Emergency Release - Bauer Jupiter 250 Mounting Instructions

18. Emergency release

(Only make an emergency release when the operator is disconnected from the
mains)!
When there is a mains failure, you can open and close the gate manually regardless
of the position the gate has got at present time.
In order to make an emergency release, turn the key 45° to the right. The inner part
of the lock must jump about 1.5 cm outwards. If it doesn' t do so, you have to push
the release button towards " the crankcase" . Moreover you have to pull the inner part
of the lock outwards using the key. (Thus the retaining plate of the engine is released
and the engine is separated from the shaft. The release button must move backwards
considerably).
The gate wing can be moved manually.
release button
Operator in released
state
release button
(pulled backwards)
How to release the operator
grommet
grommet
20
lock
lock
(inner part outwards)