Table Of Maintenance Intervals; Cleaning; Maintenance Intervals; Sharpening The Cutting Teeth - Grizzly EKS 710 T Original Instructions For Use

a specialist workshop. Use
only original Grizzly replace-
ment parts. Allow the machine
to cool before all maintenance
and cleaning work. There is a
risk of burns!
Wear gloves with cut protection
when handling the saw chain.
There is a risk of injury.

Cleaning

Do not use solvents or petrol for
cleaning. These could damage the
equipment.
• Clean the surface, ventilation openings
and handles of the equipment with a
dry cloth, brush or hand brush.
• Only dry wipe the saw chain. After
cleaning, lightly oil the saw chain with
chain oil.
Apply individual drops of oil to the
joints and the points of the teeth on the
individual chain links.

Table of maintenance intervals

Machine Part
Komplette Maschine
Accessible screws
and nuts
Chain wheel
Saw chain
Blade
Action
Check condition, replace damaged
parts if necessary
Tighten
Check, replace if necessary
Check, oil, sharpen or replace if
necessary
Check, turn, clean, oil

Maintenance intervals

Carry out the maintenance work listed
in the table below at regular intervals.
Regular maintenance of your equipment
extends the lifespan of the equipment. You
will also achieve optimum cutting perfor-
mances and avoid accidents.

Sharpening the cutting teeth

Leave the resharpening of a saw chain to
a specialist or proceed according to the
instructions for your saw chain sharpener.
Resharpening a saw chain takes practice.
If in doubt, it is preferable to replace the
saw chain.

Changing the saw chain

Never fix a new saw chain on a
worn set of teeth or on a damaged
or worn blade.
1. Switch off the equipment and discon-
nect from the mains.
Before
each use





GB
After 10 ope-
rating hours

141