5 Configure the FP0H RTEX unit
4.
5.
6.
7.
8.
12
Double-click "Positioning table configurator PM7 (RTEX unit)".
The configurator window opens.
Select "New", to create a new configuration file for the FP0H RTEX unit.
In this example, select one axis only (Axis 1). Select "OK".
Select "OK" in the "Interpolation operation group settings".
The axis to be used is an independent axis and does not belong to an interpolation
group.
Download the configuration by selecting the green highlighted button:
QS2004_V1.0_EN