Intermec 825-192-001 Instructions

Intermec 825-192-001 Instructions

Protective case

Advertisement

Use the protective case (P/N 825-192-001) to transport and store your PB50 or PB51
printer. The protective case provides easy access to the printer buttons, connectors,
and battery, allowing you to print labels while the printer is still in the protective
case. Use the handstrap or shoulder strap accessory with the protective case to make
it easy to carry. The protective case kit contains these parts:
Protective case accessory
This instruction sheet

To insert the printer into the protective case

1
Unzip the main flap on the protective case and insert the printer with the
control panel facing upward.

Protective Case Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 825-192-001 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Intermec 825-192-001

  • Page 1 Protective Case Instructions Use the protective case (P/N 825-192-001) to transport and store your PB50 or PB51 printer. The protective case provides easy access to the printer buttons, connectors, and battery, allowing you to print labels while the printer is still in the protective case.
  • Page 2 USB cable, or a serial cable to the PB50 or PB51 through the flap which protects the communications port. Communications flap Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 Protective Case Instructions fax 425.355.9551 *943-127-002* www.intermec.com © 2009 Intermec Technologies P/N 943-127-002 Corporation. All rights reserved.

Table of Contents