Akai EWI5000 User Manual page 26

CC (Continuous Controller): Select this checkbox to set Interval Button to transmit MIDI
Continuous Controller (CC) data:
•
CC Number: Use this slider to set the CC number the Interval Button will send when you
press it.
•
Release: Use this slider to set the CC value the Interval Button will send when you
release it (depending on whether or not Latch is selected below).
•
Press: Use this slider to set the CC value the Interval Button will send when you press it
(depending on whether or not Latch is selected below).
•
Latch: Select the Latch checkbox if you want the Interval Button to be a toggle button
(each press alternates between sending a Press CC value and sending a Release CC
value), or deselect it if you want it to be momentary (pressing and holding it sends a
Press CC value, and releasing it sends a Release CC value).
26