Akai EWI5000 User Manual page 28

Portamento: You can set the glide plate to use portamento to move between notes for greater
expressiveness in your performance.
•
Release: Use this slider to set the CC value the glide plate will send when you are barely
touching it.
•
Press: Use this slider to set the CC value the glide plate will send when you are touching
it fully.
•
Pedal Switch (CC65): Select this checkbox to set the glide plate to send CC #65
(Portamento On/Off). Some modules may need this message to enable or disable
portamento, though the EWI5000 and most modules do not need this.
CC (Continuous Controller): You can set the glide plate to transmit other MIDI Continuous
Controller (CC) data.
•
CC Number: Use this slider to set the CC number the glide plate will send.
•
Release: Use this slider to set the CC value the glide plate will send when you are barely
touching it.
•
Press: Use this slider to set the CC value the glide plate will send when you are touching
it fully.
28