Effects Page; Reverb - Akai EWI5000 User Manual

Effects Page

Reverb

Reverb is a spatial effect, simulating the nuanced reverberation of sound in the space of a
particular room.
Amt (Amount): Use this slider to set the Program's Reverb
Send level (the same as on the Main page). You can also set
this by using EWI5000's Reverb Knob.
Wet: Use this knob to raise or lower the blend between the
"wet" (effected) and "dry" (unaffected) signal. 0% is all dry,
and 100% is all wet, while 50% is an equal mix of both.
Damp: Use this knob to adjust absorption of higher
frequencies as the reverbating sound decays over the time.
Width: Use this knob to adjust the width of the stereo image
generated by the reverb.
Room Size: Use this knob to set the size of the room that the
reverb will simulate.
17