Output Condition - KERN ADB Series Operating Instructions Manual

11.3.2 Output condition

The data transfer type is determined in this menu item
30
Call up menu item „C5", see chap. 10.1
Use the PRINT key to select the desired setting.
Options:
C5 - 0 Automatic edition of stable weighing values
C5 - 1 Via remote control command (P)
C5 - 2 Continuous data output of stable and instable
weighing values (interval 3 s)
C5 - 3 Output for stable and instable weighing values
after pressing PRINT key
Save / back to weighing mode, see chap. 10.1
ADB-BA-e-1510