KERN ADB Series Operating Instructions Manual page 19

8.3 Zeroing
In order to obtain optimal weighing results, reset to zero the balance before weighing.
8.4 Simple weighing

 Overload warning
Overloading exceeding the stated maximum load (max) of the device,
minus a possibly existing tare load, must be strictly avoided. This could
damage the instrument.
Exceeding the maximum load is indicated by the display „Err". Unload
weighing system or reduce preload.
8.5 Unity change
By repeated pressing of the MODE key the weighed value can be switched over to
the available weighing and application units.
ADB-BA-e-1510
Unload the balance.
Press the TARE key.
Wait until the zero display appears.
Place the goods to be weighed and close the
windshield.
Wait for stability display
Read weighing result.
.
19