Target 4PC GALENA COUNTER HEIGHT SET 64414WHT Assembly Instructions Manual

Target 4PC GALENA COUNTER HEIGHT SET 64414WHT Assembly Instructions Manual

Advertisement

Date: 7-SEPT-2016
4PC GALENA COUNTER HEIGHT SET
ASSEMBLY
REQUIREMENTS:
Thank you for purchasing our product!
Please refer and use this assembly instruction to assemble the product.
Contact our customer service department in case there are any missing or
damage parts or hardware. Replacement parts are normally shipped
within 2 or 3 days.
Email: replacementparts@buylateral.com
Within 30 days from delivery date
We appreciate your business!

ASSEMBLY PREPARATION

1. Remove all packaging materials, staples and packing straps from the carton.
2. Refer to Parts List and Hardware List and ensure they are complete before you start assembling.
3. Place all wooden parts on a clean, flat and soft surface (e.g. carpet or rug) to prevent parts from getting
scratched.

SAFETY PRECAUTION:

1. KEEP ALL HARDWARE PARTS OUT OF REACH OF CHILDREN.
2. DISPOSE PLASTIC PACKAGING MATERIAL IMMEDIATELY TO AVOID ANY RISK OF SUFFOCATION TO CHILDREN AND
ANIMALS.

TIPS FOR ASSEMBLY:

1. Allow ample room for assembly and in close proximity to where product will be placed.
2. Assemble the product on a surface that does not scratch or damage the exterior gloss and finish of the furniture.
3. Please check all of the parts and quantities are included before assembly. Contact customer service for missing
parts.
4. Identify all of the parts, hardware and quantities required for each step.
5. During assembly, do not over-tighten any fittings as this may cause damage.
6. DO NOT USE POWER TOOLS TO ASSEMBLE THIS PRODUCT.
7. Always place the product on a flat surface.
8. Do not sit or stand on the partially assembled product; only use the product for which it is intended.

CARE AND MAINTENANCE

• Use a slightly damp cloth to clean the product. Do not use bleach or abrasive cleaning material.
• Check all the fittings periodically and re-tighten as necessary. Do not use the product if any of the parts is
damaged or broken.
• Never allow any kind of liquid to remain on your furniture. Absorption can cause wood to warp or delaminate.
• Do not place hot items (e.g. hot drinks) directly onto the wood surface.
• Do not drag and/or pull the furniture.
This product is for indoor and household use only - not for commercial use.
ASSEMBLY INSTRUCTIONS
20 Minutes
2-Person
Assembly Time
Assembly
Per Item
(Approximate)
Item# 64414WHT
Tools Required:
(Not Provided)
Page 1 of 6
Phillips Screwdriver
Hammer/Mallet
MADE IN MALAYSIA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4PC GALENA COUNTER HEIGHT SET 64414WHT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Target 4PC GALENA COUNTER HEIGHT SET 64414WHT

  • Page 1 Date: 7-SEPT-2016 ASSEMBLY INSTRUCTIONS 4PC GALENA COUNTER HEIGHT SET Item# 64414WHT 20 Minutes Phillips Screwdriver Tools Required: ASSEMBLY 2-Person Assembly Time Assembly (Not Provided) REQUIREMENTS: Per Item Hammer/Mallet (Approximate) Thank you for purchasing our product! Please refer and use this assembly instruction to assemble the product. Contact our customer service department in case there are any missing or damage parts or hardware.
  • Page 2 ASSEMBLY INSTRUCTIONS 4PC GALENA COUNTER HEIGHT SET Item# 64414WHT Page 2 of 6...
  • Page 3 Identify and place all of the Table parts on a material that does not scratch or damage the parts. a) Lay the Table Top (A) bottom-side up on a material that does not scratch or damage its surface. b) Attach Table Short Crossbar (C) to Left Table Leg (B) and Right Table Leg (B) using Wood Screw (N). c) Install Table Legs (B) to Table Top (A) by positioning each leg with bolt holes facing and align to the holes on the comer block on the table frame.

Table of Contents