Xerox Phaser 6300/DN Accessories Manual page 3

Page 3 of 3
Plain
Heavy Plain
Thin Card Thick Card
Glossy Coated Label
Transparency
Paper Paper Type Weight
Glossy Coated 140gsm
Xerox Digital Colour
Colotech+ Gloss
Thick Card 210gsm
Xerox Trifold Brochures Thin Card 176 gsm
Xerox Premium
Thick Card 195gsm
Business Cards
Xerox Colour Laser/
Label
Copier Labels
Xerox Phaser™ 25-
Series Premium Transparency
Transparencies
WARRANTY DISCLAIMER
Xerox makes no guarantees or warranties, either express or implied, concerning the performance, use or replacement of non-Xerox branded media or throughput products. Customers should inquire directly of their
paper distributor or manufacturer for any guarantees they may offer. When purchasing a particular media product for the first time, customers are advised to purchase small quantities to insure that their expectations are
met.
The quality of Xerox supplies is consistent from ream to ream, carton to carton, and it is backed by a Xerox 100% guarantee. The quality of non-Xerox branded paper may vary from ream to ream or carton to carton, so
for optimum performance on Xerox color equipment, use only the best--Xerox Supplies.
© 2005 Xerox Corporation. All rights reserved.
Xerox® , The Document Company®, the stylized X®, and all Xerox product names and product names and product numbers mentioned in this publication are trademarks of Xerox Corporation. Other company trademarks
are also acknowledged.
December, 2007
Phaser 6300N,
6300DN, 6350DP,
6350DT, and 6350DX
Re-Order # Cross Reference # Type
3R97577
3R97583
3R97946 103R01019
3R97512
3R93872 1 up
3R93873 6 up
3R93874 8 up
3R93875 14 up
016-1948-00
A=Auto Duplex
M=Manual Duplex
S=Simplex Only
Size Trays
Refer to the "Paper Tips" embedded page for additional printer-specific information, e.g., High
1/MPT 2 3 4 5
Paper Type Glossy Coated should be selected on the user interface. Environmental condition may
A4 A A A A A
require that this product be fed one sheet at a time. Gloss variation can occur from machine rolls,
especially on high area coverage prints.
Paper Type Thick Card should be selected on the user interface. Environmental condition may
M
A4
require that this product be fed one sheet at a time. Gloss variation can occur from machine rolls,
especially on high area coverage prints.
A4 M
Paper Type Thick Card should be selected on the user interface for Tray1/MPT.
A4 M
Paper Type Business Card should be selected on the user interface for Tray1/MPT.
A4
S S S S S
A4
S S S S S
Paper Type Labels should be selected on the user interface for Trays/MPT.
A4 S S S S S
A4
S S S S S
Paper Type Transparency should be selected on the user interface for Trays/MPT. It is not
A4 S S S S S
recommended to output more than 20 transparencies at a time.
Revision 6.0 12/02/2008
Additional Information
Capacity tray usage.