Table of Contents
Advertisement
Emergency Procedures
2. Before disconnecting the 12V battery, move the
smart key at least 2 meters away from the vehicle
to prevent accidental starting.
3. Disconnect the negative (-) 12V battery cable (A),
located in the motor compartment, to further
prevent the risk of accidental starting.
NOTICE
If necessary, lower the windows, unlock the
doors and open the trunk as required before
disconnecting the 12V battery. Once the 12V
battery is disconnected, power controls will not
operate.
4. Use the following procedures to remove the safety plug and disable the high voltage battery:
a) Remove the safety plug cover (A) located in
the trunk.
b) Remove the safety plug using the following
procedure :
1: Unlock → 2 : Release → 3: Remove
WARNING
• Even after the safety plug is removed, please
wait for 5 to 10 minutes in order to discharge
the high-voltage capacitor located in the
inverter.
Smart Key
20
Advertisement
Table of Contents
