Installing Printer Software In Windows; Installing Software; Removing Software - Xerox Phaser 6110 User Manual

1
Installing Printer
Software in Windows

Installing Software

All applications should be closed on your PC before beginning
installation.
N
: If the "New Hardware Wizard" window appears during
OTE
the installation procedure, click
the box to close the window, or click Cancel.
1
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run and an installation
window appears.
2
Choose the type of installation.
3
Follow the instructions on the screen to complete the
installation.
N
: If the installation window does not appear, click Start
OTE
and then Run. Type X:\Setup.exe, replacing "X" with the
letter which represents your drive and click OK.
in the upper right corner of
3

Installing Printer Software in Windows

Removing Software

1
Start Windows.
2
From the Start menu select Programs or All Programs →
Xerox Phaser 6110 → Maintenance
3
You will see a component list so that you can remove any
item individually.
4
When your computer asks you to confirm your selection,
click Yes or OK.
The selected driver and all of its components are removed
from your computer.
5
After the software is removed, click OK or Finish.