Understanding The Control Panel; Leds; Stop() Button - Xerox Phaser 6110 User Manual

Understanding the Control Panel

LEDs

Status Toner
LED( ) LEDs
lights green All LEDs
off
slowly blinks All LEDs
green off
fast blinks All LEDs
green off
lights red All LEDs
off
lights green each LED
blinks red
blinks red each LED
lights red
Toner LEDs
Description
The printer is ready to print.
The printer is receiving data from
the computer.
The printer is printing data.
• The printer is experiencing an
error, such as jammed paper,
open cover, empty paper, not
installated waste toner container,
or full waste toner container.
• The printer is experiencing a
service required error, such as
LSU error, fuser error, or ITB
error. Contact your sales or
service representative.
The each colour toner cartridge is
near the end of its life.
The each colour toner cartridge is
empty.
Status
LED( )
lights red
lights red
N : All printing errors will be appear in the Status Monitor
OTE
program window.
Stop(
Function
Printing
demo page
Printing
configuration
sheets
Canceling
print job
1.3
Introduction
Toner
Description
LEDs
each LED • The each toner cartridge is
lights red totally exhausted.
• The each toner cartridge is
wrong.
each LED • The each toner cartridge is
blinks red totally exhausted.
in a • The each toner cartridge is
repeated wrong.
order
) button
Description
In Ready mode, press and hold this button
for about 2 seconds until the
blinks fast, and release.
In Ready mode, press and hold this button
for about 5 seconds until the
blinks fast, and release.
Press this button during printing. The red
LED blinks while the print job is cleared
from both the printer and the computer,
and then the printer returns to Ready
mode. This may take some time depending
on the size of the print job.
LED
LED