Setting Up Your Printer; Unpacking - Xerox Phaser 6110 User Manual

2

Setting Up Your Printer

This chapter gives you step-by-step instructions for setting up
your printer.
This chapter includes:

• Unpacking

• Installing the Toner Cartridges
• Loading Paper
• Connecting a Printer Cable
• Turning the Printer On
• Printing a Demo Page
• Installing the Printer Software
Unpacking
1
Remove the printer and all of the accessories from the
packing carton. Make sure that the printer has been
packed with the following items:
Toner Cartridges
Printer software CD
N :
OTES
• If any items are missing or damaged, notify your dealer
immediately.
• Components may differ from one country to another.
• The Printer Driver CD contains the printer driver, the SetIP,
the User's Guide, and the Adobe Acrobat Reader program.
• The appearance of the power cord may differ depending on
your country's specifications. The power cord must be
plugged into a grounded power socket.
Power Cord
Quick Install Guide
2.1
Setting Up Your Printer
C
: Because your printer weighs 13.6 kg including the
AUTION
toner cartridges and the tray, it may move when you use it; for
example, when opening/closing the tray or installing/removing
the toner cartridge. Be careful not to move the printer.
2
Remove the packing tape in front of the tray and pull the
tray out. Remove the packing tape and paper cushion from
the tray.
3
Select a location for the printer:
• Leave enough room to open the tray and covers, and to
allow for proper ventilation.
• Provide the proper environment:
- A firm, level surface
- Away from the direct airflow of air conditioners,
heaters, or ventilators
- Free of temperature, sunlight, and humidity extremes
or fluctuations
- Clean, dry, and free of dust
C
: You must place your printer on a level surface. If
AUTION
you do not, print quality problems can occur.