Disposal; Separate Materials - SUSS MicroTec Delta10TT Operator Manual And Technical Documentation

Always wear safety goggles, gloves and
protective clothing when working with
hazardous materials.
• Drain all chemical and cooling liquid lines of the
system.
Note!
Disposal of drained liquid according to the
corresponding local and environmental
laws and regulations.
• Clean all contaminated parts.
• Disposal of consumable (filters) according to the
corresponding local and environmental law.

1.4.1 Disposal

Warning! - Toxic chemicals
Toxic chemicals may be present.
Contact with these chemicals and/or inha-
lation of their vapors may result in severe
health risk.
Warning! - Irritating media
Warning of harmful to heath and irritating
media.
Observe and consider the Material Safety
Data sheet of the corresponding media.
Always wear safety goggles, gloves and
protective clothing when working with
hazardous materials.
Note!
Ensure that drained liquid, contaminated
materials, used chemicals etc. are de-
posed of according to the applicable local
and environmental laws and regulations.

1.4.1.1 Separate materials:

• Forward al used piping to a special waste dis-
posal process.
• Forward all electrical/electronic parts (boards) to
a special waste disposal process.
• Forward plastic parts to a recycling process.
delta10 - dl/01-2005
SAFETY INSTRUCTIONS
• Forward metals (Stainless Steel, Aluminium) to
a recycling process.
• Chemically used in processes have to be dis-
posed of according to the applicable local and
environmental laws and regulations.
Prior to sideposal always consider and observe
the corresponding Material Safety Data Sheet
(MSDS) for detailed information.
1
9